What are the factors that affect the production efficiency of egg tray machine？

The production of egg tray machines is not a single equipment, and multiple equipment is required to be used in conjunction to operate. Therefore, if you want to make the egg tray machine the most efficient, you need to know the key factors that affect the work of the egg tray machine.

1. Temperature

The temperature mentioned here only refers to the temperature of the mold and the heating temperature of the raw materials. The temperature of the mold is an essential part of the egg tray forming. The lower the mold temperature, the faster the heat is lost due to heat conduction. The lower the temperature of the melt, the worse the fluidity.Therefore, it is very important to be able to accurately grasp the temperature of the mold for egg tray forming.The second is the heating temperature of the raw materials. Some materials need to be heated in the raw material tank because of their particularity, such as BMC materials.

2.  the time control of molding

There are three main aspects of the impact of the egg tray forming time on the product quality of the egg tray.

1. The egg tray forming time is too long, which can easily cause the product to pass the optimal forming temperature, resulting in poor final forming.

2. The forming time of the egg tray is too short to be completely filled in the mold, which affects the quality of the product.

3. The injection time is shortened, the shear strain rate in the melt is increased, the greater the shear heat generation, and the less heat is lost due to heat conduction. Therefore, the higher the temperature of the melt, the lower the viscosity, and the injection pressure required to fill the cavity must also be reduced.

In addition to the above-mentioned factors that affect the molding of the egg tray machine equipment, improper operation, long-term overloading of the equipment, and long-term non-maintenance will all lead to a decrease in the molding performance of the egg tray machine equipment. In addition, if you want to improve the molding effect of the egg tray machine equipment, you cannot only rely on the technical level of the equipment operators, but also to ensure the stability of the equipment performance, so as to greatly improve the molding effect of the egg tray equipment!